esera automation 20002 Manual del usuario
Navegue en línea o descargue pdf Manual del usuario para Accesorios esera automation 20002. esera automation 20002 4 páginas. Rain sensor 12v
Imprimir página
Art. No. 20002
Product features
Reliable, electrolytic measuring principle
Detects precipitation as rain and snow
Operating voltage 12 V DC/AC
Large, heated sensor surface for quicker
drying and winter operation
Potential-free switching output (relay) 30V/4A
Sensitivity and switching behavior adjustable
Universal wall/pole mount as accessory
1
Introduction
Before you start installing the rain sensor and putting the device into operation, read these Installation and
Operating Instructions carefully until the end, especially the section on Safety Instructions
2
Product Description
The large sensor surface reacts to rain or snow. The switching polarity and the sensitivity are adjustable. The
switchable heating prevents icing or condensation and accelerates drying. In the most sensitive setting, the
device is also suitable for detecting fog. The mast or wall bracket, which is available as an accessory, makes
installation easy. Typical applications are in garden centers, in agriculture, in building control systems, but also in
homes and gardens.
The rain detector is equipped with a relay contact for switching low voltages up to 30V DC/AC in order to be able
to act on switching devices such as an awning control unit. The sensitivity is adjustable over a wide range. The
device is equipped with a heater for faster drying and snow detection.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
User guide
Rain sensor 12V
20002 V2.0 R1.0 Manual
Page 1 of 4