Alto-Shaam 500-PH/GD Instalación Funcionamiento y mantenimiento - Página 10

Navegue en línea o descargue pdf Instalación Funcionamiento y mantenimiento para Calentador de alimentos Alto-Shaam 500-PH/GD. Alto-Shaam 500-PH/GD 17 páginas. Hot food holding cabinet, electric
También para Alto-Shaam 500-PH/GD: Hoja de especificaciones (2 páginas), Folleto (4 páginas), Manual (18 páginas)

Alto-Shaam 500-PH/GD Instalación Funcionamiento y mantenimiento
The cleanliness and
appearance of this unit will
contribute considerably to
operating efficiency and
savory, appetizing food. Good
equipment that is kept clean
works better and lasts longer.
CLEAN THE UNIT THOROUGHLY AFTER
EACH USE
Turn lights and adjustable thermostat(s) to the
1.
"OFF" position. Disconnect unit from power
source, and let cool.
Remove, cover or wap, and store unused
2.
products under refrigeration.
Remove all detachable items such as wire
3.
shelves, side racks, and any drip pan. Clean
these items separately.
Clean interior with a
4.
damp cloth or sponge
and any good commercial
detergent at the
recommended strength.
Spray heavily soiled
5.
areas with a water
soluble degreaser and let
stand for 10 minutes,
then remove soil with a plastic scouring pad.
NOTE: Avoid the use of abrasive cleaning
compounds, chloride based cleaners,
or cleaners containing quaternary salts.
Never use hydrochloric acid
(muriatic acid) on stainless steel.
D
DISCONNECT UNIT FROM
POWER SOURCE BEFORE
CLE NING OR SERVICING.
N G E R
# 8 2 0 O p e r a t i o n a n d C a r e M a n u a l • 9.
C A R E A N D C L E A N I N G
Clean control panel, door vents, door handles,
6.
and door gaskets thoroughly since these areas
harbor food debris.
Rinse surfaces by wiping with sponge and clean
7.
warm water.
Remove excess water with sponge and wipe dry
8.
with a clean cloth or air dry. Leave door open
until interior is completely dry. Replace shelves.
Interior can be wiped with a sanitizing solution
9.
after cleaning and rinsing. This solution must
be approved for use on stainless steel food
contact surfaces.
10. To help maintain the protective film coating on
polished stainless steel, clean the exterior of the
cabinet with a cleaner recommended for stainless
steel surfaces. Spray the cleaning agent on a
clean cloth and wipe with the grain of the
stainless steel.
11. Clean glass with a window cleaner.
D
AT NO TIME SHOULD THE INTERIOR
OR EXTERIOR BE STEAM CLEANED,
HOSED DOWN, OR FLOODED WITH
WATER OR LIQUID SOLUTION OF
ANY KIND. DO NOT USE WATER JET
TO CLEAN.
SEVERE D M GE OR
ELECTRIC L H Z RD
WARRANTY BECOMES VOID IF
N G E R
COULD RESULT.
APPLIANCE IS FLOODED