esera automation 11220 V2 Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Interruptor esera automation 11220 V2. esera automation 11220 V2 6 páginas. 8-fold switch module with button inputs for 1-wire bus
Imprimir página
Power consumption 12V:Idle mode, no output relay active: ca 10mA
Button interface:
Connection:
4
conditions
Ambient
Temperature, operation: 0 °C up to +50 °C
Air humidity:
Dimensions:
Protection class:
Protection type:
Insulation strength:
5
Connection plan
The connection plan is available in the
shop as own document.
Notice: A 10A preliminary fuse is required in front of screw terminal 14.
Connection top side:
15 = Output 1, make contact
16 = Output 2, make contact
17 = Output 3, make contact
18 = Output 4, make contact
19 = Output 5, make contact
20 = Output 6, make contact
21 = Output 7, make contact
22 = Output 8, make contact
Module bottom side:
Button input, 10-30V
1 = GND (load) button input
2 = Button 1
3 = Button 2
4 = Button 3
5 = Button 4
6 = Button 5
7 = Button 6
8 = Button 7
9 = Button 8
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change. ESERA-Automation, E-Service GmbH 2018
www.esera.de
All output relays active: ca 160mA
8 digital inputs, pulse input, for instance, for button or motion detector (make contact)
Pulse duration of at least 40ms
Input power 10-30VDC, maximum 10mA per input, common load.
Inputs insulated with respect to the 1-Wire interface and power supply
Screw terminals (up to 2,5qmm wire cross section)
:
10 – 92 % (non-condensing)
70 x 90 x 70mm (BxHxD)
II
IP20
500VAC output to 1-Wire Bus, 250VAC output to output
11220 V1.0_R1.1 Manual 8-Fold Switch Module
1-Wire Bus
10 = +12V external voltage (optional)
11 = GND (load)
12 = 1-Wire data line
13 = +12V voltage
Page 2 of 6