ClearCube R1350 Actualización de software - Página 2

Navegue en línea o descargue pdf Actualización de software para Servidor ClearCube R1350. ClearCube R1350 2 páginas. Bios updated to 3.32
También para ClearCube R1350: Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (1 páginas), Manual de inicio rápido (2 páginas)

Perform the following steps to update to BIOS version 3.32:

1. Download the RM332U16.zip file from the ClearCube Support Web site:

a. Open the following URL:

b. In the product support area, select R1350 in the PC Blades drop-down box.

c. Click the BIOS link and browse for the link to the 3.32 BIOS zip file.

This file contains the BIOS update, the phlash16.exe flash utility, and Crisis Recovery files and

information.

2. Plug the external drive into the USB port on the front of your Blade. If you are using a floppy drive,

insert the floppy boot disk.

3. Unzip the contents of the RM332U16.zip file to the external drive and copy the phlash16.exe and

RM332U16.wph files to the external drive or disk. (RM332U16.wph may be named BIOS.WPH)

4. Restart your system from the external drive and type the following command at the command line:

phlash16 RM332U16.WPH or phlash16 BIOS.WPH

5. Disregard the message that phlash16 displays requesting you to press any key to restart the

machine. Doing so can result in unsupported behavior. You must cycle Blade power by performing

any one of the following steps:

•

Press and hold the power button on the front of the Blade for five seconds to power down

the Blade, and then press the power button again to power on the Blade.

—OR—

•

Reset the Blade by pressing the reset button on the front of the blade or on the rear of

the C/Port.

Note: The first time you cycle Blade power after updating the BIOS, the Blade LCD displays

POST codes and then powers off and on several times. Video is not displayed until

POST 55 is displayed on the LCD. This behavior is normal and only occurs the first time

you cycle power after updating the BIOS.

For more information, contact ClearCube technical support in any of the following ways:

support.clearcube.com

(866) 652-3400

+1 (512) 652-3400

http://support.clearcube.com

Email address for ClearCube Technical Support

ClearCube Support Web site

Direct line in the US

Direct line from outside the US