3DUpFitters CR-10 S4 Manual de instalación - Página 12

Navegue en línea o descargue pdf Manual de instalación para Bastidores y soportes 3DUpFitters CR-10 S4. 3DUpFitters CR-10 S4 15 páginas. Enclosure kit

Imprimir página

9. Sealing Gaps

Once the enclosure is completely put together, it is time to make sure that each of the panels is held

tightly to each adjoining panel. The connectors are designed with a small amount of play that allows you

to make small adjustments for the perfect ﬁt.

1. Loosen screws on the panel to move.

2. Push that panel into place. You may need a friend to hold it tightly in the right spot.

3. Re-tighten the screws to hold the panel.

Repeat the product, going around the enclosure looking to make sure all of the panels are ﬂush to each

other.

Accessories

Instructions for the spool holder are available online. You

can simply sit the spool holder on the top of the enclosure,

or optionally secure it to the side of the enclosure to keep it

from falling oﬀ the enclosure as the printer vibrates the

table.

Note the location of the spool holder is for the mostly stock

CR-10 extruder location. Those of you who have heavily

customized the hot end can feel free to drill holes and

move the spool holder where appropriate.

Of course, you are free to use whatever type of freestanding

spool holder you wish; there are hundreds of designs available on Thingiverse.

Filament Guide

The ﬁlament guide is also optional, but does make it easier for the ﬁlament to make the 90

degree change from the top into the horizontal extruder mechanism. This type of 90 degree

bend doesn't work with really brittle ﬁlament such as metal infused copper or bronze, and in

those cases you can simply bypass the guide altogether and send the ﬁlament directly into the

extruder.