Divus KNX SUPERIO Manual de inicio rápido - Página 6

Navegue en línea o descargue pdf Manual de inicio rápido para Panel táctil Divus KNX SUPERIO. Divus KNX SUPERIO 20 páginas.

2 FIRST COMMISSIONING

2.1 INTRODUCTION

KNX SUPERIO is a touchpanel, on which the

cross-platform software OPTIMA is running.

This way KNX SUPERIO becomes a web based

visualisation and monitoring solution for home

& building automation systems, which are re-

alized according to the world wide KNX stan-

dard. The configuration and the use of OPTI-

MA takes place directly over the OPTIMA web

interface that can be displayed on different

devices / operating systems through using a

conventional web browser.

2.2 CONTENT OF THE PACKAGING

The KNX SUPERIO packaging contains the fol-

lowing material:

˚ DIVUS KNX SUPERIO

˚ connector for power supply

2.3 INSTALLATION, CONNECTION AND COMMISSIONING

2.3.1 INSTALLATION AND CONNECTION

KNX SUPERIO fits into the available mounting

units (refer to the corresponding datasheet for

more information). For a correct function, the

following connections must be guaranteed:

˚ Power supply 230V AC

˚ KNX bus connection via supplied connector

˚ Network connection via CAT5 network cable

Details about the configuration

of OPTIMA can be found in the

OPTIMA ADMINISTRATOR-MANUAL, while

details about the usage of the visualisa-

tion can be found in the OPTIMA USER-

MANUAL.

˚ connector for KNX bus

˚ KNX CONTROL stick, containing the develop-

ment software (PDK) and detailed documenta-

tion

˚ Printed installation guide

(not supplied)

The connection to the KNX bus is

not really needed for the configura-

tion of KNX SUPERIO, but it allows a more

efficient programming, since direct tests

of the system can be performed.