Clearfield FieldSmart 48 Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Bastidores y soportes Clearfield FieldSmart 48. Clearfield FieldSmart 48 18 páginas. Fiber distribution point (fdp) port outdoor wall box

Imprimir página

________________________________________________________

Cable Preparation and Installation

The slack storage compartment of the wall box is large

enough to accommodate more buffer tube than would

typically be used in this application. It is recommended,

however, that you only prep as much cable as you will

need to perform your work.

Note: You will need approximately 3 feet of fiber inside the

splice tray so add that to the total prep length.

Included in each wall box are 2 liquid tight fittings (sealcons) and an assortment of rubber inserts (grommets). Choose

the insert that is close to, but larger than, the size of the cable.

Compression Fitting Grommet

Small Black Grommet

Medium Black Grommet

Gray Grommet

In order to swap grommets,

remove the dome nut from the

sealcon and pry the current

grommet out, being careful not

to damage the compression

fitting. Push the new one in to

place. Ensure new grommets

are installed with the tapered

side up (see pictures).

Note: It is sometimes easier to

remove the grommet by using

a blunt ended tool to push at it

from the bottom, inside the seal-

con. Take care not to damage

the grommet.

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]

FieldSmart

Manual 020012 REV A - Aug 2018

Fiber Distribution Point (FDP)

24 & 48 Port Outdoor Wall Box

Installation Manual

Cable Size (Inches)

0.3 - 0.4

0.41 - 0.5

0.51 - 0.79