ESI KeyControl 49 Manual de instrucciones (Pc Connect)

Navegue en línea o descargue pdf Manual de instrucciones (Pc Connect) para Equipos de grabación ESI KeyControl 49. ESI KeyControl 49 1 páginas. Midi keyboard

Imprimir página

English

Thank you for choosing KeyControl 49 - a cost effective MIDI keyboard for your home studio.

Connection / Power Supply / Controls

KeyControl 49 gets connected via the included USB cable to your computer. This connection powers the keyboard and is used to transfer

the MIDI data to your computer. In addition, the MIDI data is sent out via the MIDI output port that you can connect to other devices such

as a sound module. Just connect KeyControl 49, launch and configure your favorite audio software and start playing!

KeyControl 49 can also be used standalone when connected to an optional 9V DC power supply (not included). In this case the MIDI data

will only be sent out via the MIDI output port.

KeyControl 49 provides three buttons on the left side (

sensitive keys that can be used as additional control keys when in edit mode.

Octave Change

The keyboard range can be moved two octaves lower or higher using the

LED blinks when the octave range is moved down twice, it is on when the range is moved down once. The

octave range is moved up twice, it is on when the range is moved up once. Press the

default octave range (then both LEDs are on).

Quick Program Change

Edit

Press the

button. The LED will light up. Now you can step through the program numbers with the

Panic / Reset

Edit

Down

Press

and

simultaneously to send MIDI note-off messages to every note on every channel to restore order to the system.

MIDI Channel

Edit

1. Press and hold the

button for 1.5 seconds to enter the edit mode. The LED will blink.

Ch.

Edit

2. Press the

key. The

3. Enter the MIDI channel value with the numeric keys (

Wheel Assignment

Edit

1. Press and hold the

button for 1.5 seconds to enter the edit mode. The LED will blink.

Wheel Assign

2. Press the

key. The

3. Enter the MIDI controller number with the numeric keys (e.g. 7 for MIDI volume) and confirm it with

Bank Select

Edit

1. Press and hold the

button for 1.5 seconds to enter the edit mode. The LED will blink.

LSB

2. Press the

key for a LSB Bank Select (#32) or the

3. Enter the desired bank number with the numeric keys and confirm it with

Numeric Program Change

Edit

1. Press and hold the

button for 1.5 seconds to enter the edit mode. The LED will blink.

PROG

2. Press the

key. The

3. Enter the program number with the numeric keys and confirm it with

Velocity Curve

Edit

1. Press and hold the

button for 1.5 seconds to enter the edit mode. The LED will blink.

Velocity Curve

2. Press the

3. Enter

with the numeric keys to select one of the two available velocity curves and confirm it with

Transpose

Edit

1. Press and hold the

button for 1.5 seconds to enter the edit mode. The LED will blink.

Transpose-

Transpose+

2. Press

Reset

Edit

1. Press and hold the

button for 1.5 seconds to enter the edit mode. The LED will blink.

Reset

2. Press the

key and then press

More Information

KeyControl 49 can be used standalone (with optional power supply), connected via USB to a PC running Windows XP or a Macintosh

running Mac OS X. If you want to use KeyControl 49 with Windows 2000 or Windows ME you need to download a special driver from the

www.esi-pro.com

ESI website (

support.

Edit

Down

and

LED will blink.

0-9

Edit

Down

and

LED will blink.

MSB

Edit

Down

and

LED will blink.

Edit

Down

key. The

and

LED will blink.

to transpose the keyboard by one half step down or up. You can reset to the default with

Enter

. KeyControl 49 will restore all values to factory defaults.

) where you can also find more information about KeyControl 49, our other products and about technical

Down

Pitch Bend

), two wheels (

Down

and

Down

Enter

) and confirm it with

key for a MSB Bank Select (#0). The

Enter

Modulation

) and 49 full size velocity-

Edit

buttons when the

LED is off. The

and

buttons simultaneously to reset to the

Down

and

Enter

Edit

Down

and

Enter

Down

LED blinks when the

buttons.

LED will blink.

Transpose 0