ESI KATA-DC-BLK Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Bastidores y soportes ESI KATA-DC-BLK. ESI KATA-DC-BLK 12 páginas. Monitor arm

Imprimir página

Kata

Step #3: remove the plastic bag

Hold the arm when you are removing the plastic bag to avoid the arm from bouncing.

Step #4: attach VESA plate to monitor

• Remove the VESA plate from the VESA mount by pushing forward on the tab at the top and lifting upward.

— TIP: Practice re-installing the VESA plate before attaching it to the monitor. This will make step 3 easier.

• Place the monitor face down on a flat surface. Align the VESA plate holes with the holes on the back of the monitor. Attach the VESA plate using the four VESA plate

screws provided.

— There are two sets of four holes on the VESA plate. One set has holes 3.9" (100mm) apart, the other set has holes 3" (75mm) apart. Use the set that matches the

holes on the rear of the monitor.

lift o VESA plate

push tab forward

VESA plate screw

VESA

plate

monitor

(face down)

Page 5

Assembly

3.9"

(100mm)

(75mm)