ESI KATA-GM-WHT Manual de instrucciones de instalación - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Bastidores y soportes ESI KATA-GM-WHT. ESI KATA-GM-WHT 12 páginas. Monitor arm

Imprimir página

Kata

Step #7: install lockout set screw(s), if desired

Default rotation of the fixed arm and motion arm is 360°. Installation of a lockout set screw limits rotation to 180°.

• To lockout rotation of the fixed arm, install a M4x9 set screw in the upper hole in the recessed portion of the monitor arm. Tighten the screw, then back it off one turn.

• To lockout rotation of the motion arm, install a M4x15 set screw in one of the two holes in the underside of the fixed arm. Tighten the set screw, then back it off one

turn.

— From the user's perspective, when the fixed arm is to the left, you will install the M4x15 set screw in the front hole to create a 180

to the right, you will install the M4x15 set screw in the rear hole to create a 180° lock out.

• The motion or fixed arm must be in its desired range of rotation when installing the lockout set screw. Only one motion arm lockout set screw may be installed.

monitor

not shown

front

rear

M4x15

underside

rear screw

motion

arm

180°

front screw

ﬁxed

arm

M4x15

underside

Page 7

lockout. When the fixed arm is

M4x9

dual Allen key

2mm end

180°

recessed portion

Assembly