ESI 3V-LX-C4836-30 Series Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior ESI 3V-LX-C4836-30 Series. ESI 3V-LX-C4836-30 Series 12 páginas. Victory-lx 3 leg electric table base
Imprimir páginaVICTORY-LX 3 LEG ELECTRIC TABLE BASE
STEP 4
Use the 5mm Allen key to attach the three top
supports to the leg columns.
• Use two M6x18 socket head screws (with round
point tip) per top support.
•
• Be sure the short side of the outer top supports is
toward the rear of the work surface.
IMPORTANT: Do not use the M6x15 socket head
STEP 5
• Use the 5mm Allen key to loosen all 16 set screws on the inward side of the cross channels.
• Position the outer leg columns and top supports so that the outer top supports are approximately 1"
(25mm) from the ends of the table and the center leg top support is centered on the
angle of the table.
• Expand the cross channels to the outer top supports and under the center leg brackets.
• Center the inner cross channel within the outer cross channels.
Loosen
Set Screws
5mm
Allen Key
3
Set Screws
Expand
Cross
Channels
Inner Cross Channels
Outer Cross Channels
M6x18
Round Point
5mm
Allen Key
Loosen
ASSEMBLY