ESI FLEX2-BLK Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior ESI FLEX2-BLK. ESI FLEX2-BLK 12 páginas. Electric table base

ALL-FLEX

ELECTRIC TABLE BASE

™

STEP 11

If the table depth is 30" (76cm) or more, expand the top supports on each side.

• Remove the two machine screws from the top support using the 4mm Allen key.

• Slide the top supports to the longer length, as shown below.

• Re-install the machine screws in the forward two holes of the top support.

Remove

Screws

Expand

STEP 12

Once the frame is in its final position, attach it to the work surface using the M5x18 screws (20 total required).

• Attach the screws through the

mounting tabs on the frame, the

mounting tabs on the inner piece

of the cross channel, and the holes

at the ends of the top supports.

• Use a Phillips screwdriver.

19¼"

Install

Screws

23½"

M5x18

ASSEMBLY