ESI SW10K eXperience Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Altavoces ESI SW10K eXperience. ESI SW10K eXperience 9 páginas. Professional reference sub-woofer monitor
También para ESI SW10K eXperience: Manual del usuario (13 páginas)

Imprimir página

ESI

SW10K eXperience

1. Introduction

Congratulations on your purchase of the ESI SW10K eXperience.

A subwoofer is an essential ingredient for many monitoring setups. Although many studio monitors

such as our nEar04, nEar06, nEar05 eXperience or nEar08 eXperience provide sufficient bass

frequency response, adding a SW10K eXperience subwoofer will help you to provide a better

picture of the low frequencies in your mix. Wheather you are producing classical 2.1 sound or 5.1 /

7.1 surround sound productions, SW10K eXperience will easily become an important part of your

monitoring setup.

2. Basics & Installation

For optimal performance of SW10K eXperience, read the instructions in this manual thoroughly

and carefully before you are using the speakers.

Unpacking / Handling

To remove the monitor from the carton its best to turn the package carefully upside down on the

floor or on a table and then lift the carton vertically up slowly to leave the monitors resting in the

packaging foam. Make sure that you don't grab the speaker driver unit on the front to avoid

damage. Now check the monitor for signs of damage that might have occurred in shipping. In the

unlikely event of this, please contact the reseller of the product immediately. Be careful when you

remove the packaging foam. Please keep all packing materials.

Connection

High quality balanced or unbalanced audio cables are recommended for input connection. The

monitors typically connect to the line level output of a mixing console, to a computer audio card or

a professional bass management amplifier. Make sure the power of the monitor is switched off

before you connect any audio cables. Also turn down the volume initially.

XLR balanced connection

Connect male side of XLR balanced cables to the

balanced inputs of SW10K eXperience – as show

on the picture on the right. Make sure the power

cable is connected as well.