3form SimpleSpec 200.49 Seeyond Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Mobiliario interior 3form SimpleSpec 200.49 Seeyond. 3form SimpleSpec 200.49 Seeyond 9 páginas.
Imprimir página
Seeyond
SimpleSpec 200.49
Installation
2
Attach Baseplate to Floor
Mark the floor where you intend to install the Seeyond
Partition. Once the position is marked, position the
baseplate. The actual partition overlaps the baseplate
on all sides by 3/4" (except where adjacent to another
baseplate) so keep that in mind when positioning the
baseplate. If using anchors follow Steps 2a-b, if using
VHB Tape follow Step 2c.
a
Attach with Anchors
using a mortar bit for 3/16" fastener and hammer drill
(or 11/ 6 4" drill bit for wood), pre-drill holes into the floor.
Hole Depth = Screw Length + 1/2"
b
next install the baseplates using the included screws
(3-15-0842).
For more information, please visit 3-form.com or call 800.726.0126
June 2021 | MAn-RTG-200-49 | ReV 003 © 2021 3form, Inc. All rights reserved.
Hole
Depth
tm
c
Attach with VHB Tape
Optional: You can also mount the baseplate to the
floor by using 3M VHB tape 0.060" or thicker. We
recommend using VHB 4991 or VHB 4624. Apply tape
every 12" as shown in diagram below.
"
* When mounting with VHB Tape, the partition can tip.
It is recommended to use anchors (Steps 2a-b) for
permanent installation.
3
Attach Bottom Row of Back Tiles to
Baseplate
a
Position the bottom row of back tiles (A1-B, B1-B) then
(C1-B, D1-B) on the baseplate. The magnets should
help you align these properly.
A2-B
A1-B
Installation Manual
"
"
"
C2-B
D2-B
B2-B
D1-B
C1-B
B1-B
"
5