ClearOne MAX EX Manual de instalación y funcionamiento - Página 4
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Teléfono de conferencia ClearOne MAX EX. ClearOne MAX EX 10 páginas. Audio conferencing
También para ClearOne MAX EX: Hoja de especificaciones (3 páginas), Ficha de datos (2 páginas), Folleto (2 páginas), Manual de instalación y funcionamiento (11 páginas), Manual de introducción (2 páginas)
Imprimir página
4
Getting Started
Connecting your conferencing phone
To Link In
25' Cat. 5 cable
To Link Out
Figure 2. Connecting MAX EX
1. Connect the Cat. 5 cable from the Link Out jack on the base unit to the Link In
jack on the conferencing pod.
2. Connect the base unit to the telephone jack using the RJ-11 telephone cable.
3. Connect the power cord to the base unit and plug it directly into an electrical out-
let.
Connecting additional MAX EX phones
From Link Out
To Link In
25' Cat. 5 cable
To Link Out on Base Unit
Figure 3. Connecting additional units
1. Connect the 12' Cat. 5 cable to the Link Out jack on the first phone and the Link
In jack on the second phone.
2. Continue linking up to three additional MAX EX phones in the same fashion. A
total of four units may be connected.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Getting Started
Rear of conferencing pod
RJ-11
Rear of base unit
telephone
cable
12' Cat. 5 cable
To Link In
Getting Started
Connecting to a digital phone line
WARNING! Do not connect the conference phone directly to a digital (PBX) line, PER-
MANENT DAMAGE MAY RESULT.
If you have digital (PBX) telephone service, you need to run an analog extension from the
PBX (recommended for best performance) or use a digital-to-analog telephone line con-
verter. For more information, contact ClearOne Technical Support.
Electrical
Outlet
AC Adapter
Base Unit
Figure 4. Connecting the base unit to digital-to-analog converter
1. Connect one end of the telephone cable into the phone jack on the back of the
base unit and the other end into the digital-to-analog converter.
2. Connect the converter's power adapter into an electrical outlet.
3. Connect a second telephone cable from the converter to a digital or PBX phone.
Consult the converter user manual for more information.
4. Plug the base unit into an electrical outlet and connect to the pod.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Phone Jack
Digital, PBX,
or Multi-line phone
KONEXX KONFERENCE
Digital-to-Analog
Converter
Handset
5