ClearOne BMA CT Manual de inicio rápido - Página 10
Navegue en línea o descargue pdf Manual de inicio rápido para Sistema de micrófono ClearOne BMA CT. ClearOne BMA CT 17 páginas. Beamforming mic array - ceiling tile
También para ClearOne BMA CT: Manual de instalación (2 páginas), Manual de inicio rápido (17 páginas)
Imprimir página
BMA CT
UPDATING ARRAY FIRMWARE
1.
Connect the P-Link cable between the CP2 units and the arrays.
2.
Connect the CP2 units with CONVERGE Pro 2 CONSOLE.
3.
Open the Firmware Loader screen.
4.
Browse for the BMA_CT_vx.x.x.x.mdo file.
5.
Download the array firmware.
6.
The array(s) will default and reboot after the download of firmware.
7.
Units are fully upgraded. (All array units connected via the P-Link on
the site are simultaneously updated.)
TESTING THE ARRAYS
The array must be added to the site using the CONVERGE Pro 2
CONSOLE software. This software also provides the capability of
configuring the beams (enable/disable) and other characteristics
available in Configuration mode. Refer to the online help available with
the CONVERGE Pro 2 CONSOLE software.
V
& m
oLume
ute
These controls are available through the controller configured for your
CONVERGE Pro 2 site.
m
a
icroPhone
rray
The illuminated LED indicators on the face of the array change color
when the microphone array is active/muted. You can choose colors to
indicate either state, or even set the indicators to remain off by using
CONVERGE Pro 2 CONSOLE to change Unit Properties for the array.
8 8
Led i
ndicatorS