Akiyama sd2igital Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Reproductor MP3 Akiyama sd2igital. Akiyama sd2igital 17 páginas. Twin sd card player

Imprimir página

DISPLAY LCD

17
1
2
16
15
14
13
1
. CUE INDICATOR –This indicator will glow when the device is in CUE mode and will flash
every time a new CUE POINT is set.
2
. FOLDER INDICATOR – Indicates the number of the currently playing folder.
3
. TIME BAR INDICATOR –Shows either time remaining or elapsed depending on the setting of
the TIME BUTTON. This bar will begin to flash shortly before the end of a track. The flashing bar is
a great visual reminder a track is about to end regardless of which time mode the unit is.
4
. BPM STATUS – This will indicate that theAUTO BPM counter is active.
5
.
PITCH METER – Indicates the percentage of a track's pitch.
6
.
BPM METER – Indicates the BPM value of the currently playing track.
7
. TEMPO LOCK– Indicates if the tempo lock is activated (lock symbol).
8
. LOOP INDICATOR – Indicates if LOOP function is activated.
9
. RELOOP INDICATOR – Indicates if a loop has been set which can be activated with the Reloop
function ("Reloop").
10
. AUTO CUE STATUS – Indicates if Auto Cue is activated ("AUTO CUE"). Press and hold the
SGL/CTN for 1 sec. to turn theAuto Cue function on and off.
11
. TIME DISPLAY – Indicates the time of the chosen Time mode in minutes, seconds and frames.
12
. SD INFORMATION INDICATOR – Indicates the current name of the track, of the folder and
the sampling rate.
13
. TIME MODE – Indicates the elapsed time of a track ("ELAPSED") or the remaining time of a
track ("Remain"). Change between these two modes with the Time button.
14
. REPEAT INDICATOR – Indicates whether the unit is in REPEATED play mode.
15
. SINGLE INDICATOR – Indicates whether the play mode is set to single ("SINGLE") or
continuous mode (no display).
16
. TRACK INDICATOR – Indicates the number of the currently playing track.
17
. PLAY/PAUSE INDICATOR – Indicates the device play mode (" "), if the player is in pause
mode (" ").

OPERATION

CARD SELECT functions
1.
LED DISPLAYTO CARD SELECTING
Switch on the power and the relational LED goes out. Whether you have inserted SD card or not, the
default for SD card selection is as below:
SD1 LED is on in the playerA.
4 5
3
6
7
12
11
8
10
9
SD2 LED is on in the player B.
At the same time, the LED1 and LED2 for SD1 and SD2 in the middle of front-
panel will display as below:
LED1 is on means the input source assigned to playerAis active
LED2 is on means the input source assigned to player B is active.
2.
CARD SELECT
There is a CARD SELECT key to select the card playback in each PLAYER by your desires.
You have two different choices as below:
(a)
THE SAME CARD PLAYBACK
To play the same card in both player A and player B; insert the card into either SD1 or SD2 slot. Press
the CARD SELECT and both SD1 LEDs in the player panel are on when card is in SD1 slot; either
does when card is in SD2 slot.
(b) TWO CARDS PLAYBACK
Each SD slot inserts a card to play.
3. CHANGE CARD DURING PLAYBACK
It must in the pause mode, to press the CARD SELECT key you can select the other card. It will no
function when in the play mode.
4