Alton EVOLUTION EVSTA2012M Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Kit de invernadero Alton EVOLUTION EVSTA2012M. Alton EVOLUTION EVSTA2012M 18 páginas. Aluminium staging and shelving

Imprimir página

Shelving Installation

Start by making a pencil mark on each glazing bar. You can set the height of your shelf to what ever

suites your needs, but the optimum position is 300mm down from the top edge of the eaves bar.

This will give you enough room on top of your low level staging and enough height for smaller

plants on the shelving. Another benefit is if you have an A-frame it is easier to fit the shelving around

this.

Once all the small brackets are fitted you can attach the first staging arm (diagram 1). Fit a diagonal

support to the arm on the first slotted hole, then attach one of the small brackets to the diagonal

support (diagram 2). Now fit the arm to the small bracket on the side of the greenhouse with an M6

bolt. Using a small spirit level adjust the position of the bracket at the end of the diagonal support

until the shelf arm is level, then fix with a 25mm screw (there is no need to pilot hole for a screw of

this size).

300mm

Dia. 1

HE0300M

Dia. 2

Diagram 1

Diagram 2