Alton EVOLUTION EVSTA2506M Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Kit de invernadero Alton EVOLUTION EVSTA2506M. Alton EVOLUTION EVSTA2506M 18 páginas. Aluminium staging and shelving

Imprimir página

Fitting staging around a Partition

If you have a partition you will need to adapt your staging to fit. If you have advised us of the

position of your partition in advance we should have supplied the closest length combination as

possible.

For example, if you have a 16ft long greenhouse and want to position the partition 6ft from the back

we would supply you a 6ft run and a 10ft run. This means the 6ft run would fit in the back of the

partition without modification and the 10ft run would just need cutting down to size. In this

scenario you would trim 12mm of the end of each 10ft slat.

Be careful when fixing to the bar capping on the partition. The gable glazing bar should be ok as you

should be fixing close to the centre point of the bar (in-line with the capping screws), so you will be

ok to use a 25mm screw supplied with your staging (diagram 17). For the side partition bar you will

need to use a 16mm screw supplied with your partition (diagram 18).

Dia. 18

Dia. 17