ClearSounds Quattro 4.0 Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Amplificador ClearSounds Quattro 4.0. ClearSounds Quattro 4.0 4 páginas. Neckloop with removable bluetooth mic (bt4)
También para ClearSounds Quattro 4.0: Manual de inicio rápido (4 páginas)

2.
PAIRING THE QUATTRO 4.0 WITH A BLUETOOTH DEVICE
Make sure other connected Bluetooth devices are turned off when syncing a new Bluetooth device.
STEP 1: Ensure Quattro
4.0 is turned off, then
press and hold MFB for
approximately six seconds.
3.
TAKE A CALL
x2
STEP 1: To answer
the call: Firmly press
MFB twice.
4.
PLACE A CALL USING CALLER ID
HOLD
STEP 1: To call using
the Caller ID list
on the Quattro 4.0
(Caller ID service
required): Press and
hold MFB until you
hear a tone.
STEP 2: After around
six seconds, the
Quattro 4.0 announces
"Pairing", and
"Pairing..." appears on
the Quattro 4.0 screen.
HOLD
STEP 2: To reject
STEP 3: To check Caller
the call: Press and
ID (Caller ID service
hold MFB.
required): Firmly press
MFB once. The number
appears on Quattro 4.0
screen. To answer call,
press MFB again.
STEP 2: Caller
ID list appears
on screen. List
includes calls
received or missed
while the phone
was connected to
the Quattro 4.0.
STEP 3: Turn on the
Bluetooth device and put
it in Bluetooth pairing
mode. Often this requires
device menu selections
such as Settings >
Bluetooth > ON.
Choose Quattro 4.0.
STEP 3: Highlight the
<
number that you want
to call by tapping
.
NOTE: You can place a call directly from your phone with sound
delivered through your Quattro 4.0 if "Headset" or "Quattro 4.0"
is selected on the phone.
STEP 4: When
the device name
appears on the
Quattro 4.0 screen,
it is paired and
connected.
<
STEP 4: Adjust the
STEP 5: To end
>
volume: Tap
call, press and
(volume -) or
hold MFB. The
(volume +). Volume
Quattro 4.0
levels (1-15) appear
announces "call
on the screen when
terminated."
engaged in a call or
using the QT4 Mic.
STEP 4: Press
MFB. "Dialing"
appears on the
screen.
HOLD
<
STEP 5: Adjust the
>
volume: Tap
(volume -) or
(volume +).