ClearSounds SoundWizard II Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Amplificador ClearSounds SoundWizard II. ClearSounds SoundWizard II 5 páginas. Personal communications system
Imprimir páginayou will hear your call through the speakers. Continue to speak into the
handset. (Note: you can hear through the handset in addition to the speakers
when the speakers are plugged into the SoundWizard II.)
1. Plug the IR Module into the top of the base
receiver (see diagram).
2. Plug your earbuds, headset, neckloop or silouette
into the headset jack.
3. Your SoundWizard II is
now a powerful re-
ceiver to any existing
95 KHz IR transmitter
or to our optional IR
Transmitter (HT-SWIRT).
If you purchased the Optional IR Transmitter, see Instruction Sheet- Insert A for
set-up instructions.
Important Information
We have made the volume & tone controls simple to use so that you may change
the settings to suit your hearing needs for each listening situation. Sounds and
sound quality will vary depending on your surroundings.
IR Module
You may find the need to switch from the directional mic to omni-directional mic
or you may need to make slight adjustments to your tone or volume controls de-
pending on the environment or the pitch of the person's voice you are speaking
with. This is normal and expected.
For the various accessories available for the SoundWizard II, please see the Acces-
sories Order Form, go On-line to www.SoundWizard.com or call us at 800.288.8303.
Important Safeguards
Loud volume can damage your hearing. The SoundWizard II Personal Communi-
cation System is designed specifically for people with hearing loss. This device is
capable of producing sound pressure levels up to 120 decibels. Serious damage to
hearing can occur if this device is used improperly. Always turn the volume down
before turning the unit on. Be sure to use the SoundWizard II no louder than nec-
essary to understand and enjoy the sound.
Specifications
Power:
Two (2) AA batteries
with earbud load typical
peak average
(Need this info)
Phone Module
IR Module
Microphone
Frequency Response
Directional:
Omni-directional
Base Unit
Maximum Freq. Boost
Max Output with earbuds
Should be 120dB SPL
Infrared:
Maximum Sensitivity
Carrier Frequency
Audio Frequency Response
Phone Module Audio Frequency Response
Max Output with earbuds
Max. Frequency Boost
Dimensions
Base U nit
Phone Module
IR Module
8.5 mA
(Need this info)
(Need this info)
(Need this info)
(Need this info)
(Need this info)
Should be 30dB @ 5.2KHz
(Need this info
(Need info)
Should be 940 Nmeters
(Need info)
(Need info)
(Need info)
(Need info)
(Need info)
5"L x 2.25"W x 1.39"D
3.09"L x 1.92"W x 1.39"D
2.33"L x 1.43"W x 1.04"D