Aimpro21 RC132 Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Presentadores digitales Aimpro21 RC132. Aimpro21 RC132 16 páginas.

RF132, Presenter with RF wireless technology

TROUBLE SHOOTING

1. How to re-link Presenter and Receiver

If you cannot do the previous steps successfully or need to clear previous

pairing setting, you need to re-link the presenter with receiver. Keep

pressing both UP and DOWN buttons of the presenter at the same time

around 3~5 seconds and LED of the presenter will be keep light. Then the

LED of the presenter will quick flash around 2 seconds, the clean pairing

setting steps will be done. Please put your presenter closed to the receiver

around within distance 5 cm and press any button of the presenter around

1~3 seconds except laser button, the red indicator of presenter will keep

flash if quick-link is successful. If the receiver is inserted correctly, the

blue indicator of receiver will flash once when Presenter key is pressed.

Then you can start to use the presenter.

After the successful pairing, the LED of presenter and receiver will flash

once

when press the button.

2. If you miss the Receiver

After you buy a new receiver, you need to clear previous pairing setting.

Please keep pressing both UP and DOWN buttons of the presenter at the

same time around 3~5 seconds and LED of the presenter will be keep

light. Then the LED of the presenter will quick flash around 2 seconds,

the clean pairing setting steps will be done.

Please put your presenter closed to the receiver around within distance 5

cm and press any button of the presenter around 1~3 seconds except laser

button, the red indicator of presenter will keep flash if quick-link is

successful. If the receiver is inserted correctly, the blue indicator of

receiver will flash once when Presenter key is pressed. Then you can start

to use the presenter.

After the successful pairing, the LED of presenter and receiver will flash

once when press the button.

3. It's not work when you press the button.

If the button cannot work when you press, and laser is still working,

please change your battery and try again.

4. If you feel your cursor is moving too fast or slow when you use the

mouse stick of the presenter

Please go to the control panel of your PC system to adjust the mouse

speed.

5. If your cursor can't change to the and mark when you move to the