ClearSpan Premium Solar Star 104918 Manual de instrucciones de montaje - Página 10
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Kit de invernadero ClearSpan Premium Solar Star 104918. ClearSpan Premium Solar Star 104918 17 páginas. Home-attached greenhouse
Imprimir páginaNOTE: The distances measured in the previous diagram
are the same when the frame is square. When installing
the roof panels, periodically check the frame for square.
The frame must remain square for the roof panels to
install correctly.
23. With the frame squared, locate a short section of
roof support plate #SG10150 (26") and attach the
support to the inside top of the first small front panel.
Roof Support Plate
NOTE: The first roof support plate is installed with one
end positioned past the edge of the short front panel and
flush with the polycarbonate of the angled end panel.
Roof Support Plate
24. Choose two (2) forty-eight inch (48") roof support
plates, attach these to the tops of the short front
panels, and work toward the other end of the
greenhouse.
Visit www.ClearSpan.com for additional products and customer assistance.
Angled End
Panel
Angled End
Panel
(Inside view)
25. Complete the installation of the lower roof support
plates by installing another 26" section.
NOTE: In the above diagram, the front panel has been
moved to better show the roof support plates.
26. After installing the lower roof support plates, attach
three 3" x 3" flat brackets to the end panels in the
locations shown below for both ends.
Diagram above shows a wider model.
27. Place the first two roof panels in place and secure
them to the lower roof support plates from the inside.
9 of 16