ClearSpan R024B00006 Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Kit de invernadero ClearSpan R024B00006. ClearSpan R024B00006 7 páginas. End panel

Typical End Panel Design

D-rings

Panels include evenly-spaced D-rings attached along the

top edge. This end panel is typically shipped as shown

above.

During installation, metal pipe is assembled and inserted

into the horizontal pocket (if present). The metal conduit

assembly is then secured to the end frame using 1" strap

and QH1061 ratchets.

Consult the services of a professional contractor to

determine the best way to secure your end panel to the

end frame if the frame differs from what is shown.

Panels of this design are typically attached to the end wall

using 1" strap threaded through the D-rings and around

the rafter. The panel skirt (if present) can remain loose or

it can be secured to the end wall as desired.

For typical applications, the upper flap of the end panel

is pulled between the end rafter and the main cover. It is

then secured to the end rafter using a few Tek screws and

washers to keep it in place. The 1" strap is also secured at

each end to keep it in place.

End Panel Design

Zippers

(if equipped)

Horizontal Pocket

End Panel Skirt

End Panel Flap

D-rings

D-Rings

End Panel

Flap

Revision date: 06.21.12