Altrad BELLE PCX 20/50D Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Herramienta eléctrica Altrad BELLE PCX 20/50D. Altrad BELLE PCX 20/50D 17 páginas.

Paving Pad

The Paving Pad has been designed to be used

when tamping down Paving Slabs and Block

Pavers. However, it should not be used for

normal compaction work.

Before fitting, make sure the Paving Pad you

have is the correct size and the correct type.

The Paving Pad will arrive pre-assembled and

will just need to be fitted to the Plate Compactor.

To fit the Paving Pad (Item 1), place the Pad

under the Plate Compactor ensuring the securing

holes line up with the holes on the front of the

baseplate.

Apply Loctite 262 to the Screw (Item 2) and

secure the Paving Pad using all Fasteners (Items 2-4). Tighten to 50Nm.

Transporter Attachment

The transporter attachment enables the operator to move the compactor to the work place with the minimum of effort.

Removable Transporter Attachment

To fit the transport attachment, align the pivot bracket with the holes on the rear of the baseplate.

The two securing bolts should be passed through the pivot bracket and the baseplate. Tighten to 50Nm.

Slide the wheel frame onto the pivot bracket, tilt the compactor forward then swing the wheel frame forward and under. Finally, tilt the

compactor back and onto the wheels.

Fixed Transporter Attachment

To fit the transport attachment, align the bracket with the holes on the rear of the bedplate. The two securing bolts should be passed

through the bracket and into the bedplate.