ClearSpan 103700 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario exterior ClearSpan 103700. ClearSpan 103700 7 páginas. Poly shelters greenhouse bench

Imprimir página
Step 3: Lay your U-shaped frame assembly up side down on the ground as follows:
• With the small groove DOWN if using an expanded metal top
• With the small groove UP if using a plywood, polymax sheet, or other top material
Step 4: Slide (2) band clamps onto each cross support tube
Step 5: Slide the first cross support tube into the channel in the side rails of your frame. Position it
so the centerline of the tube is 12-1/2" from the end rail.
Step 6: Install remaining cross supports spaced 24" on center from each other.
Step 7: After checking the positions of your cross supports, secure them in place with a single Tek
screw at each end through the channel into the cross support tube.
Step 8: Slide (2) band clamps onto each leg tube.
Step 9: Attach (2) legs to both of the outermost cross supports using a split "T" clamp for each leg.
Position the legs from the side rails using the distances given in the table below:
Width of Table Model
2'
4'
6'
Leg Inset from Side
1"
9"
12"
Page 4