DIY BBQ DIY-BBQ-6FP Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Chimenea exterior DIY BBQ DIY-BBQ-6FP. DIY BBQ DIY-BBQ-6FP 14 páginas. 6-foot firepit module assembly

Imprimir página

Step

Spread out the pieces to form a loose framework of one of the Perimeter walls prior to attaching anything.

Note: Make sure that the outside edge studs have web holes and the inside edge studs have the large holes

(as seen below).

Studs with the web

holes should be on

the outside

Step

Slide each stud into the bottom track. Make sure that each of the precut holes line up.

Note: On the outside edges of the track, make sure to keep the open side of the inner edge studs facing the open

side of the outer edge studs.

Step

Adjust the top of each stud so that they fit comfortably inside the top track. Then use the butt of your palm to care-

fully but firmly hit each stud into the top track so that all precut holes in both the track and studs are aligned.

Note: If the studs do not slip right in when hit, readjust the studs and then reapply pressure to the track.

Perimeter Wall Assembly

Studs with the large

(drill) holes should

be on the inside

7 8