Edgewater Networks 200AE2 Manual de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de inicio rápido para Pasarela Edgewater Networks 200AE2. Edgewater Networks 200AE2 7 páginas. Network services gateway
Imprimir página
Step 1 − Connecting the Cables
1. Connect one end of an Ethernet cable to local LAN port 4 of the 200AE2 denoted by "D"
in the following diagram. Connect the other end of the cable to your computer's Ethernet
port.
Make sure that the LED in the top right corner is solid green. This LED indicates that the
link is up.
2. If you are using an ADSL connection, connect one end of the phone cable to the ADSL
port (denoted by "B" in the below diagram) and the other end of the cable to the phone
jack on the wall.
3. If you are using an Ethernet connection, connect one end of the Ethernet cable to the
Ethernet WAN port (denoted by "E" in the below diagram) and the other end of the
Ethernet cable to an Ethernet port on a router or a modem.
4. Plug one end of the power adapter into an AC outlet and the other end into the power
receptacle on the 200AE2 denoted by "A" in the following diagram.
Instructions
Page 2 of 7