Edgewater Networks EdgeProtect 7300 Manual de hardware - Página 4

Navegue en línea o descargue pdf Manual de hardware para Controlador Edgewater Networks EdgeProtect 7300. Edgewater Networks EdgeProtect 7300 16 páginas. Enterprise session border controller 7000 series
También para Edgewater Networks EdgeProtect 7300: Manual de instalación del hardware (18 páginas)

Imprimir página
7300 Hardware Guide
B
Erase
C
VGA
D
Ports 4-5-6
E
Port 3 - Management interface
F
Port 2 - WAN interface
G
Port 1 - LAN interface
H
USB
Console
I
1 Click – No action
2 Clicks - Reset CLI and GUI password – no service interruption
3 Clicks - Restore to factory default and reboots the system
Currently not used
Currently not used
1 x 10/100/1000 Mbps RJ-45 Ethernet port for optional management network
connectivity, this interface must not be on the same network as the WAN or LAN
subnets. This network cannot be within a subnet contained in a "Route"
statement
1 x 10/100/1000 Mbps RJ-45 Ethernet port for connectivity to the WAN or
Internet network connectivity - Default IP: none
1 x 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity
Default IP: 192.168.1.1
Currently not used
1 x RJ-45 console port for management – 9600-N-8-1 NONE for flow control –
RJ-45 to DB9 console cable included in system box
3