EDgun EDMS Manual - Página 12

Navegue en línea o descargue pdf Manual para Instrumentos de medida EDgun EDMS. EDgun EDMS 16 páginas. Digital measuring system

Resetting the statistics.

 Release the button on this menu item to select this menu item.

 After selecting a menu item, the picture "Cancel or confirm"

 Pressing the button will cancel the action (reset the statistics) and return to the

default settings item (Pmin display).

 After waiting, a message is displayed

 Statistics are reset, the gauge is turned off.

Setting the "zero" of the pressure sensor.

Please pay attention:

In the event of failure of the O-ring, the pressure gauge will begin to leak air. To

replace the O-ring, you will need to unscrew the sensor mounting nut, pull out the

sensor, replace the O-ring and install the sensor back, and tighten the sensor

pressure nut. Chances are you will not set the EDMS on the O-ring to the exact

pressure as the factory. This change of seating the O-ring can lead to errors. If this

rare failure occurs, there is a zero reset menu

 Release the button on this menu item to select this menu item.

 After selecting a menu item, the picture "Cancel or confirm"

The ceramic sensor ("sensor") sealed with an O-ring.