ClearWater mineralpure R-50 Manual de instalación - Página 11

Navegue en línea o descargue pdf Manual de instalación para Sistemas de filtración de agua ClearWater mineralpure R-50. ClearWater mineralpure R-50 16 páginas.

Imprimir página

M). CLEANING AND/OR REPLACING ELECTRODE

The only part of the MineralPURE Ionizer that will need maintenance or

replacement is the electrodes. They should last about 1-5 years depending on

your pool size, length of swimming season, water temperature and how well the

water was balanced (ion level, pH, etc.). If the LED light "Check Electrode"

comes on, it may be time to clean or replace the electrode. To inspect the

electrodes, simply unscrew the electrode chamber with your hands and visually

inspect the electrode bars. A blue greenish coating is normal, however, if there is

a heavy buildup, you may need to clean the electrode. Using an old toothbrush

and lemon juice or a muriatic acid/water solution, scrub the buildup off the

electrode. If the electrodes are thin and worn out, they will need to be replaced.

Electrode Reordering Information:

Replacement Electrode - Part # CLE-02 - residential copper electrode for the R-50 Model.

Always add more teflon tape when screwing the electrode back into the flow-cell tee.

You should replace the reagents at least once a year. You can either replace the entire test kit (exactly as supplied in the

box when you received the MineralPURE unit) or replace the reagents.

Order # CLA-41 MineralPURE complete test kit

Order # CLA-42 Replacement reagents "A" and "B"

Contact your dealer or Clearwater Enviro Technologies, Inc. for more ordering

N). ION-TEST KIT REPLACEMENT

CLA-41

information or visit www.ElectrodeWarehouse.com

The Healthy Alternative to Chlorine

CLA-42