EDI DEFLECTOMETER LMD301 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida EDI DEFLECTOMETER LMD301. EDI DEFLECTOMETER LMD301 14 páginas.

Imprimir página
EDI DEFLECTOMETER LMD301 Manual de instrucciones
Flash Sequence
1 flash
2 flashes
3 flashes

2.6.2 PREVIOUS FAULT

If the fault condition is removed, the DET indicator and the channel output will return to
normal operation. The FLT indicator will continue to flash indicating that a fault had
previously occurred. This Previous Fault indication may be reset by momentarily pressing
the MODE and FREQ buttons simultaneously. See section 2.5.2.
Eberle Design Inc.
LMD301, LMD302, and LMD304
Series Operations Manual
Open Circuit Loop (or Inductance too high)
Shorted Circuit Loop (or inductance too low)
>25% Change in Inductance
Fault
Page 6