ClearWater Lights Glenda Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Accesorios para motocicletas ClearWater Lights Glenda. ClearWater Lights Glenda 16 páginas. Led light kit for bmw k1600gt
También para ClearWater Lights Glenda: Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (12 páginas)

Imprimir página

Step 4: Wiring

Wire Routing:

• Be sure to route wires so that they cannot become tangled or caught

in either a suspension part or steering part. Check movement of both

steering and suspension before riding the bike.

• It is sometimes helpful to follow existing wire routing.

• Use a Posi-lock to connect RED wire from the trident adapter to the thin

RED wire from the relay harness (2 wires).

• Use a Posi-twist to connect GREEN wire from the trident adapter to the

two GREEN wires from the lights (3 wires).

• Use a Posi-twist to connect BLACK wire from the harness relay to the

two BLACK wire from the lights (3 wires).

• Use a Posi-twist to connect RED wire from the harness relay to the two

RED in Glenda, WHITE in Darla wires from lights (3 wires).

• Plug the Trident Adapter into the Data Cable

• Run the RED and BLACK power wire, and Data Cable along the air

intake up to the battery. (Fig.1) and (Fig. 2)

• The BLACK power wire with the ring terminal goes to the negative ( - )

side of the battery. The RED power wire with the inline fuse holder goes

to the

positive ( + ) side of the battery.

Remove the fuse while wiring

the lights to prevent any accidental shorts.

• Plug the Data Cable into the CANopener.

Fig. 1

Fig. 2

Page 9