Clearwater Spas CLEAR Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Sistema de agua Clearwater Spas CLEAR. Clearwater Spas CLEAR 8 páginas.

Your CLEAR system has been preset at the factory for your
particular spa model and water volume.
The CLEAR button will give a boost of CLEAR sanitation when
setting up the spa for the first time, when you have large
number of guests, or when using your spa frequently.
Left alone, CLEAR continues working at normal levels keeping
your water clear and clean. It's that simple. You may never
have to press the CLEAR button, but rest assured that it is
there if you need it.
Spa owners that want to adjust the settings themselves can
still access the main control by removing the front cabinet
panel.
Ionizing
Large Dose
Turn off
Turn On
Cell Connect
The CLEAR Button
When the mode of the controller is set to "Ion/Action" and
the "Ionizing" light is illuminated on the controller, the area
in the center of the topside control will illuminate in blue.
Press the center of the logo to engage the "Large Dose"
mode for the number of hours programmed on the
controller. When "Large Dose" is active, the area in the
center of the topside control will flash in blue. Once the
cycle expires, the controller will go back to "Ion/Action", the
center area will illuminate in blue and the flashing will stop.
To stop the Large Dose mode before the cycle finishes, hold
down the button in the center of the logo for 10 seconds.
If the mineral level is too high, or you would like to shut off
the ionizing for any other reason, hold down the button in
the center of the logo for 10 seconds or until the blue light
goes off.
If the ionizing function has been turned off, press the button
in the center of the logo to turn it back on. The center of
the logo will illuminate in blue to indicate that the system is
ionizing.
When the mineral cell is unplugged, the electrode bars are
not under water, or the cell is worn past its useful life, the
light in the center of the topside control will flash red.
CLEAR | State of the Art Water Management | 3