DJ Swivel Spread Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ DJ Swivel Spread. DJ Swivel Spread 5 páginas.

PLUGIN OVERVIEW

1. Spread Knob - This knob will increase or decrease

the stereo width of the entire signal equally across

all 3 frequency bands. Note: Decreasing the stereo

image will not work on mono tracks.

2. Frequency Band Offsets - These sliders are

designed to make width adjustments to each

individual frequency band, which can be set with

the 2-slider crossover below (#6).

3. Frequency Band Mute/Solo - These buttons allow

you to mute or solo individual frequency bands.

4. Side Roll Off - This slider filters out all low

frequencies occupying the *Side, up to a maximum

of 200Hz. This is used to clean up any phasing

issues as a result of low end stereo information.

This slider does not in any way interfere with low

end signal occupying the Mid portion of the stereo

image.

5. Audition - This button allows you to audition the

signal occupying the Side's to ensure you're dialing

in the correct setting.

6. Crossover - This 2-slider crossover allows you to set

the desired frequencies for each band.

7. Tilt - The tilt sliders allows you to adjust the volume

of the left and right sides of the stereo image, to

better balance out signal, while maintaining the

widest and most accurate stereo image.

8. Settings - This setting button will open up the

activation window, and also displays credits.

*Mid/Side processing works by decoding a stereo

signal into two components. The 'Mid' channel contains

just the information that appears in both the left and

right channels, and the 'Side' channel contains all the

information that differs between the left and right

channels.