Cleaver The Bullock Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Electrodomésticos de cocina Cleaver The Bullock. Cleaver The Bullock 16 páginas. Dry ageing cabinets
Imprimir página
8. Controlling Humidity
Important: By default, the LED displays the actual internal relative humidity.
The humidity range for the CLEAVER Dry Ageing Cabinets is 60% to 85% relative
humidity. The humidity setting is pre-set for 80% RH.
Prolonged power failure may reset humidity to this setting. Short power outages
should not effect your humidity setting.
To set up the humidification system:
•
Press the arrow to open the water tank cover A and lift to remove
(Figures 1 and 2).
•
Lift the humidifier tank straight up to remove (Figure 3).
•
Remove the lid on the tank and fill with about 750mL of distilled or
purified water. Close lid on tank (Figure 4 and 5).
•
Return tank to its original position and replace cover.
The cabinet will indicate low water reserve with a short beep accompanied by
error message "E3" on the humidifier display panel on the control panel and
flashing LED lights.
Figure 1:
Figure 2:
Changing the Humidity:
Refer to image on page 9.
Press button ① once to set the humidity displayed on the LED screen
⑤. Use the buttons ⑥ or ⑦ to increase or decrease humidity.
Figure 3:
11
Figure 4:
Figure 5: