Fitel CS201 Manual de instrucciones
Navegue en línea o descargue pdf Manual de instrucciones para Herramientas Fitel CS201. Fitel CS201 4 páginas. Cable sheath stripper
Imprimir páginaCS201 Cable Sheath Stripper
Instruction Manual
Thank you for purchasing our CS201 cable sheath stripper.
Read this manual carefully before use. Keep this manual with
this product for future reference.
The specification of this product may be changed without prior
notice.
The contents of this manual may be changed without prior
notice.
Work carefully when you handle the cable which contains live
fiber.
Proceed work confirming the entering condition of the blade
without fail. It causes the fiber breaking when working without
confirmation.
Applicable cable of the CS201 is the PE and the LAP sheath
cables. Do not use for other cables. It causes the damage of the
blade or the fiber breaking.
■ Feature
This tool is a sheath removal tool of PE and the LAP sheath cable
which has the rip cord.
■ Applicable Cable
(1) Cable diameter: 10～32mm
(2) Sheath type
: PE (Polyethylene Jacket)
LAP (Laminated Aluminum Polyethylene
Jacket)
*Do not use CS201 for cables other than the above cables.
■ Operation Method
(1) Marking and Taping
Use vinyl tape to mark the section of the sheath which be removed.
(About 5 rotations)
Clean the cable if it is dirty.
Read this manual carefully before use. After reading keep this
manual with this product. This instruction manual describes how to
operate this product safely in order to avoid accidents such as
potentially fatal injuries and property damages.
Various symbols are used throughout this instruction manual and on
the product to prevent physical harm to you or other people and
damage to property. The symbols and their meanings are explained
below.
CAUTION
CAUTION
Do not use CS201 for the cable with strength member inside cable
sheath.
Do not use under a humid or dirty conditions or under the vibration. It
causes the trouble.
Do not touch the blade of CS201. It causes the injury.
■ Part Name
Blade
adjusting knob
(0.1mm/div)
（2）Attach the CS201
Attach the CS201 to the inside of the marked position.
Fasten the cable adjusting knob.
Confirm the CS201 smoothly slide.
This symbol indicates matters that may
lead to injury or physical damage if
ignored or incorrectly handled.
This symbol indicates the point which
should be noted.
Blade
Cable
adjusting knob