Altronics Redback A 4510 Manual de programación - Página 4
Navegue en línea o descargue pdf Manual de programación para Timer Altronics Redback A 4510. Altronics Redback A 4510 16 páginas. Yearly timer
También para Altronics Redback A 4510: Manual de instrucciones (12 páginas)
Imprimir página
For our example we are going to start by adding the event group labelled "StandardDay".
NOTE: No spaces or special characters can be used when creating the labels.
Enter the label, select a colour for the visuall representation of the day on the calendar as shown below and then press "OK".
The Event Group created will now appear in the Event Groups as shown in figure 4.
Before we go any further we will save the calendar configuration. Navigate to the "File" menu in the top left corner and
select "Save".
NOTE: When the save button is pressed the configuration will be saved to the root directory from which the software was
run. In our case we ran the software directly from the SD card, so all configuration information will be saved to the SD
card. If we wish to save the configuration elsewhere we could use the "Save As" option which would allow us to navigate
to another folder. There is no option to save the configuration with a preferred name.
The configuration file is saved to the CONFIG folder and the event group information is saved to the GROUPS folder.
We will now create the other groups we would like to add.
We will add Event Groups for public holidays labelled "PublicHols" and an Event Group for school holidays labelled
"SchoolHols". We can do this by following the same procedure just outlined or we can use the "Duplicate Event Group"
option (see section 6.0 for more details).
The result is shown in figure 5.
4
Redback® Proudly Made In Australia
A 4510 Software Programming Guide
Fig 4
www.altronics.com.au