dji MATRICE 300 RTK Manual de mantenimiento - Página 6
Navegue en línea o descargue pdf Manual de mantenimiento para Drones dji MATRICE 300 RTK. dji MATRICE 300 RTK 19 páginas. Dual gimbal connector
También para dji MATRICE 300 RTK: Información sobre el producto (17 páginas), Manual de mantenimiento (19 páginas), Manual del usuario (15 páginas), Manual de inicio rápido (10 páginas), Información sobre el producto (10 páginas)
Imprimir página
MATRICE 300 RTK Maintenance Manual
1. All the antennas on the aircraft and remote controller are tightened firmly and free
Antennas
of damage. They are in a place that will give the propellers proper clearance.
Gimbal
1. The gimbal appears intact and can rotate smoothly in all the three axes.
(Payload)
2. The lens is clean.
Radar
1. There is no blockage. The shell of the radar has no damage. The mounting
(Payload)
bracket is secure and in good condition.
1. The control sticks are centered in neutral position, with no foreign object such as
Remote
sand and soil, and can smoothly reach full ranges of motion in all channels.
Controller
2. The screen on the remote controller is clean and dry.
1. The dampeners and gimbal anti-drop rope are not damaged. The damping plate
Damping Plate
has no crack or split. The gimbal connector is secure and cannot be rotated in
the opposite direction after the gimbal is installed.
1. There is no blockage in the working range of the Infrared Sensing and Vision
Systems and auxiliary lights, especially when using a non-DJI payload or
accessory.
2. Check the lenses or glass of the Infrared Sensing and Vision Systems and
Infrared
auxiliary lights.
Sensing and
a. Make sure there are no stickers or any other obstructions over the Infrared
Vision Systems
b. Clean the lenses and glass with a dust-free cloth if there is any moisture,
c. Contact DJI Support if there is any damage to the lenses of the Infrared
1. Spare USB-C cables
2. Two pairs of spare landing gears
3. Two pairs each of spare CW and CCW propellers
Emergency
4. Spare microSD cards
Supplies
5. Screwdrivers, screws of all types used, cable ties, tape, a dry and soft cloth
6. A multimeter
7. A case to store emergency supplies
※ It is recommended to replace the propellers only in an emergency situation during operations. After the emergency
flight is over, please contact DJI technical support or an authorized agent for overhaul as soon as possible.
Checklist When Powered On
Type
Essentials
1. Confirm the control stick mode (Mode 1/2/3), and check in the control stick
calibration page in the app if the proportion of the control lever is correct.
Remote
2. The remote controller has sufficient power and the battery is firmly installed.
Controller
3. Confirm that the channel used is automatic or custom, and then choose the
operation frequency and channel according to the signal to noise ratio.
6
©
2020 DJI All Rights Reserved.
Sensing and Vision Systems.
fingerprint, or dirt.
Sensing and Vision Systems.