dji Matrice 600 Pro Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Drones dji Matrice 600 Pro. dji Matrice 600 Pro 16 páginas.
También para dji Matrice 600 Pro: Manual de inicio rápido (8 páginas), Manual de consulta rápida (9 páginas)

Imprimir página

1. Using the Batteries

Charging Protection LED Display

The table below describes the battery protection mechanisms and their corresponding LED patterns.

Battery Level Indicator While Charging

LED1 LED2 LED3 LED4 Indicator Pattern

After any of the above protection issues are resolved, press the power button to turn off the Battery

Level Indicator. Unplug the Intelligent Flight Battery from the battery charger and plug it back in to

resume charging. Note that you do not need to unplug and plug the battery charger in the event of a

charging temperature error; the battery charger will resume charging when the temperature falls within

the normal range.

DJI does NOT take any responsibility for damage caused by third-party battery chargers.

Calibrating the Battery Capacity:

To effectively calibrate the capacity of the Intelligent Flight Battery, it is recommended to

charge and discharge the battery thoroughly for every 10 charge-and-discharge cycles.

Choose one of the following methods to discharge battery. After discharging the battery, fully

charge the battery to finish the calibration.

Slow: Place the battery into the Matrice 600 Pro's battery compartment and power it on.

Leave it on until there is less than 5% battery level, or until it can no longer be turned on.

Check the battery level in the DJI GO app.

Fast: Fly the Matrice 600 Pro outdoors until there is less than 5% battery level, or until the

battery can no longer be turned on.

LED2 blinks twice per second

LED2 blinks three times per second Short circuit detected

LED3 blinks twice per second

LED3 blinks three times per second Charger overvoltage detected

LED4 blinks twice per second

LED4 blinks three times per second

MATRICE 600 PRO User Manual

Battery Protection Item

Overcurrent detected

Overcharge detected

Charging temperature is too

low (<5°C)

Charging temperature is too

high (>40°C)