dji AGRAS MG-1S RTK Manual de inicio rápido - Página 13

Navegue en línea o descargue pdf Manual de inicio rápido para Cuadricópteros dji AGRAS MG-1S RTK. dji AGRAS MG-1S RTK 20 páginas.

Try to keep the aircraft inside the optimal transmission range. If the signal is weak, adjust the antennas or fly the

aircraft closer.

Avoid using wireless devices that use the same frequency bands as the remote controller.

Getting Ready for Takeoff

When using your MG-1S / MG-1S RTK for the first time, activate it in the DJI MG app. Your DJI account and

internet connection are required.

1. Place the aircraft on an open, flat ground with the Aircraft Status Indicator facing towards you.

2. Unfold the propellers and check that they are mounted onto the motors securely. Unfold frame arms and

tighten arm sleeves firmly. (Refer to Page 7 for how to unfold the frame arms.)

3. Power on the remote controller.

4. Ensure the battery is securely mounted. Connect the battery to the communication port and then the XT90

port.

Calibrating the Compass

1. Go to the app and tap Start to enter Operation View. Tap the Aircraft Status Bar on top of the screen and

select Calibration in the Aircraft Status List, then follow the on-screen instructions.

2. Hold the aircraft upright and rotate it 360 degrees along the central axis until the Aircraft Status Indicator

changes to solid green.

3. Hold the aircraft with its nose facing upwards and rotate it 360 degrees along the central axis.

4. The Aircraft Status Indicator shows the current flight mode when calibration is complete. If the Aircraft Status

Indicator blinks red, repeat the steps above to recalibrate the compass.

Optimal Transmission Range

AGRAS MG-1S

Quick Start Guide