dji INSPIRE 2 Manual de inicio rápido - Página 6

Navegue en línea o descargue pdf Manual de inicio rápido para Cuadricópteros dji INSPIRE 2. dji INSPIRE 2 18 páginas. Focus handwheelremote controller stand
También para dji INSPIRE 2: Manual del usuario (14 páginas), Manual de mantenimiento y reparación (6 páginas), Descargo de responsabilidad y manuales de seguridad (20 páginas), Manuales de seguridad (4 páginas), Manual (2 páginas), Manual del usuario (5 páginas), Manual de inicio rápido (9 páginas)

Imprimir página

5. Prepare the Remote Controller

Unfold the mobile device holder and the antennas.

Optimal Transmission Range

Press the button to

release the clamp.

Dual frequency support makes the HD video downlink more stable. Note that the Russian only have the 2.4G frequency.

DO NOT operate more than 3 aircrafts within the same area (size equivalent to a soccer field) to prevent transmission interference.

6. Controls

The stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft's elevation

and heading. The right stick controls the aircraft's forward, backward and lateral movements. To adjust the

FPV camera, press and hold the C2 Button and rotate the control dial.

Left Stick

You can change the stick mode in the DJI GO 4 app.

Remote Controller Status Indicator

RC normal but not connected to aircraft.

RC normal and connected to aircraft.

RC Slave Mode and not connected to aircraft.

90 。

5.8G

2.4G

Try to keep the aircraft inside the

optimal transmission range. If the

signal is weak, adjust the antennas

or fly the aircraft closer.

Place your mobile

device and adjust the

clamp to secure.

Connect your mobile

device with a Micro USB

cable.

Right Stick

60 。

Unfold

Strong

Dual Remote Controllers

You are required to link the Master

and Slave remote controllers.

Regarding the Master RC, launch

the DJI GO 4 app and enter GO FLY.

Tap

to enter the RC Settings. Set the RC

Status as 'Master', and then enter the

desired connection password.

Repeat to set Slave RC Status to

'Slave'. Then tap Search for Master

RC and connect to the Master RC

with your preset password.

RC Slave Mode and connected to aircraft.

( B...) Low battery warning / RC error.

( B—B—...) RC idle for 5 minutes.

Weak

on the top of your screen

FPV Camera Controls