FITKIT FT300M Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Cinta de correr FITKIT FT300M. FITKIT FT300M 16 páginas.

4) Console Instructions

Amount of programs

3 manual programs, 12 automatic programs.

Safety lock function

Disconnect the security lock, "E7" shows on the screen. The treadmill stops immediately, and a

beep sound is let out. Put the safety key back, all the data will be cleared in 2 seconds.

Key function

Start button, Stop button

When the power is on, press the start button to start the treadmill. Stop key: when the treadmill is in

running state, press the stop button, all data will be cleared, and the treadmill gradually comes into a

complete stop and returns to the manual mode.

Program key

In standby mode, pressing this key can cycle the options from manual mode to P1 to P12 automatic

programs. Manual mode is the system defaulting running mode.

Mode key

In standby mode, press this key can cycle the options of 3 different countdown running modes.

Speed + - key

Use these keys to adjust the speed of the treadmill. Press + to increase the speed and press - to

decrease the speed.

Display Function

Speed Display

Display the current running speed value.

Time Display

Display the time of manual mode and the countdown time under automatic modes and programs.

Distance display

Display cumulative distance under manual mode and programs. Display the distance countdown in

automatic mode.

Calorie display

Display cumulative calorie under manual mode and programs. Display the calorie countdown in

automatic mode.

Heart rate display

Heart rate signal will be detected, and the heart-shaped mark flashes while testing.

Heart rate measure function

In the case that the treadmill is energized, hold the heartbeat sensor piece for 5 seconds, and the

heart rate will be shown on the screen. The heart-shaped mark flashes while testing.

This data is for reference only, it cannot be considered as medical data.