dji NAZA-F45 Montaje y parametrización - Página 8
Navegue en línea o descargue pdf Montaje y parametrización para Cuadricópteros dji NAZA-F45. dji NAZA-F45 17 páginas. Using transmitter (futaba t10 j) and receiver (r3008sb)
Imprimir páginawww.pcessflight.com
R3008SB 2.4GHz T-FHSS 8-Channel Receiver
The R3008SB is a T-FHSS telemetry-capable receiver that features S.Bus and S.Bus2 compatibility
and 8 conventional ports. The receiver also features an external battery voltage connector. With S.Bus
function, you can control more than 8 servos with S.Bus hub.
Type: Full-range flight receiver
Modes: T-FHSS
Features: High-voltage operation, frequency-hopping Spread Spectrum design, Dual Antenna
Diversity, S.Bus and S.Bus2 compatibility
Voltage Input: 4.8V-7.4V battery or regulated output from ESC
Compatible Batteries: NiCd, NiMH, LiPo, LiIon or LiFe
Dimensions: 0.98 x 1.69 x 0.55 in (24.9 x 42.8 x 14.0 mm)
Weight: 0.34 oz (9.5 g)
LINKING OF RECIEVER AND TRANSMITTER
1 Place the transmitter and the receiver close to each other within one meter.
2 Turn on the transmitter and the receiver.
3 Push and hold the Link switch on the receiver.
4 When the link is complete, the LED on the receiver changes to solid green.
* Please refer below for LED status and receiver condition.
No signal reception: Red On
Receiving signals: Green On
Receiving signals, but ID is unmatched: Green Blink
TRANSMITTER CONFIGURATION SETTINGS
Turn on the transmitter and you will look display like this
Step 01: Select the Model on your Transmitter and then press Execute.
7