dji DF01 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Accesorios para cámaras dji DF01. dji DF01 6 páginas. Dji ronin 3d focus system

Lens Configuration

Lens configuration can be used to store up to three sets of calibrated lens parameters.

Once stored, users can select parameters directly by tapping Lens Configuration.

Usage

If the camera lens is replaced, the focus motor must be recalibrated the next time the

3D Focus System is powered on. To calibrate the focus motor, either double tap the

AF/MF Switch button or follow the prompts to calibrate the focus motor after selecting

the lens in Lens Configuration.

To switch between AF and MF, press the AF/MF Switch button once or switch between

AF and MF on the touchscreen. Once in AF, the 3D Focus System will be active and

the status indicator turns solid green.

DO NOT hot plug and unplug the 3D Focus System. Otherwise, the

parameters will be lost and the focus motor will need to be calibrated again.

Only manual focus lenses with a mechanical limit are supported.

DO NOT use corrosive organic solvents such as alcohol to wipe the lens of

the 3D Focus System.

Make sure the infrared distance sensor (TOF) is not blocked by the hood

or filter of the camera. Otherwise, the auto focus of the 3D Focus will be

inaccurate.

Status Indicator

Solid green

Solid yellow

Solid red

Model

DF01

Weight

54.8 g

Description

The 3D Focus System is working in AF

The 3D Focus System is calibrated and working in MF

The 3D Focus System needs calibrating