dji MG-12000 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Accesorios para cámaras dji MG-12000. dji MG-12000 13 páginas.

Introduction

The MG-12000 battery has a capacity of 12,000 mAh at a voltage of 2x2.22 V. With it's

advanced power management system, your aircraft will have all the power it needs.

Battery Functions

The functions of the MG-12000 are as follow:

1. Battery Level Display: The LED indicators display the current battery level.

2. Battery Life Display: The LEDs display the current battery power cycle.

3. Communication: Transmits battery information such as voltage, power level and

compliance to the main controller of the aircraft.

4. Battery Management: system is activated when the battery is connected. Battery will enter

into power saving mode when it is disconnected from the aircraft

5. Battery Exception Record: Battery exceptions, such as charging/discharging beyond the

normal temperature range, and storing the battery beyond the recommended power level,

are recorded.

6. Charging Exceptions: The Battery Level Indicator blinks to indicate exceptions that occur

during charging. Refer to "Charging Exceptions" for more information.

Refer to the safety requirements on the stickers before using the battery. Users

accept full responsibility for violating the safety requirements stated on the stickers.

Warranty will be void 6 months after it is delivered, or after 180 power cycles.

Powering On: Connect the Communication Port to the aircraft and then connect the XT90

Port. The battery will power on automatically.

Power Off: Disconnect the XT90 Port from the aircraft and then disconnect the

Communication Port to power off the battery.

Usage Notes：

1. The recommended operation temperature range for the battery is from 0℃ to 40. The

battery performance is reduced when flying in the low temperature environments(below 5℃).

Ensure the battery is fully charged when flying in temperatures between -10℃ and 5℃.

2. Preheat the battery to above 5℃ (ideally above 20℃)when operating in the low

temperature environment.

3. DO NOT use the battery when the environmental temperature is above 45℃.

XT90 Port

Balancing Port

Battery Level Indicator

LED1

LED2

LED3

LED4

Communication Port

Indicator Button