dji OSMO MOBILE 3 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Accesorios para cámaras dji OSMO MOBILE 3. dji OSMO MOBILE 3 16 páginas.
También para dji OSMO MOBILE 3: Manual de inicio rápido (12 páginas), Manual de inicio rápido (8 páginas)

Imprimir página

2. Shutter Button

Press once to take a photo or start or stop recording. Press and hold for burst shooting when in

photo mode.

3. Battery Level Indicators

Indicates the battery level of Osmo Mobile 3. With Osmo Mobile 3 powered off, press the M button

once to check the battery level.

4. System Status LED

Indicates the current status of Osmo Mobile 3.

Blinking Pattern

Solid yellow

Solid green

Pulses yellow or green

Blinks red and green alternatively

Solid red

5. Joystick

Move vertically to tilt the mobile phone. Move horizontally to pan the mobile phone. The joystick

control direction can be set in DJI Mimo.

When using ActiveTrack 3.0, move the joystick to adjust the camera view.

ActiveTrack 3.0: ActiveTrack 3.0 has been optimized for tracking human subjects with a head and

shoulder model along with face detection using deep learning algorithms. The subject will remain in

the center of the camera view. The default position is the center of the camera view. Users can also

adjust the camera view manually. There are three ways to use ActiveTrack 3.0:

a. Drag a box on the screen in the camera view in DJI Mimo. A green box around the subject

indicates ActiveTrack 3.0 is successfully enabled. Tap the X icon on the top corner to stop

tracking.

b. Enable One-press ActiveTrack in DJI Mimo, and press the trigger once to start or stop ActiveTrack

3.0.

c. Enable Gesture Control in DJI Mimo, and then perform a palm or V gesture for one to two seconds

when facing the camera. The back camera will detect the nearest head and shoulders and start to

track the subject. The front camera will detect the nearest face and start to track the subject.

Descriptions

Bluetooth disconnected

Bluetooth connected

Standby mode

Firmware update required or firmware update failed

Gimbal abnormality (such as temperature is too low or too

high, battery is over discharged)

OSMO MOBILE 3 User Manual