dji E800 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Accesorios para drones y cuadricópteros dji E800. dji E800 9 páginas. Multirotor propulsion system

Imprimir página

screw and a CW mark on the propeller mount. The propellers without the CW mark should be mounted to

counter-clockwise motors, which have a silver propeller screw and a CCW mark on the propeller mount.

Clockwise Motor

2) Align the gap A inside the propeller nut with a fin B on the Propeller Mount.

3) Press the propeller down onto the mount firmly and, while holding the propeller pressed down,

rotate the propeller in the lock direction

4) To remove the propeller, press the propeller down firmly and, while holding the propeller pressed

down, rotate the propeller in the unlock direction

Lock: Tighten the propeller by rotating it in this direction.

Unlock: Remove the propeller by rotating it in this direction.

Active braking function is enabled by default, and is for use with the standard quick-

release propellers. Using this function with self-tightening propellers may cause the

propellers to fly off or other flight problems.

Be sure to press the propellers down firmly until they are all the way down before rotating

to attach or detach them from the motors. Otherwise the propeller or propeller mounts

may be damaged.

When attaching a new propeller for the first time, it may not secure in place properly after

rotating, because the hole on the propeller nut is blocked. In this case, pull the propeller

up to help lock it in position. Then hold the motor in place and try to rotate the propeller.

If it can't be loosened without pressing down, it is locked in place.

When storing for an extended period, remove the quick-release propellers to prevent

undue wear on the spring locks.

Active braking:

and the rotational energy will be recovered.

Propeller Mount

Securing Spring

The motor will provide reverse torque actively to slow down the propeller,

DJI E800 Multirotor Propulsion System

CCW

Counter- clockwise Motor

until you feel it secure in place.

until it can be removed easily.

Attaching the

propeller