dji Goggles Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Accesorios para drones y cuadricópteros dji Goggles. dji Goggles 18 páginas.
También para dji Goggles: Manual de inicio rápido (5 páginas)

Imprimir página

DO NOT charge the Goggles when it is powered on to ensure safety.

When using a non-standard charger, the maximum output voltage must not exceed 12 V.

The Goggles battery is located in the headband. You can connect the headband individually

to the charger for charging. The battery is fully charged when the charging status indicator

turns off.

A standard charger is recommended for charging. It takes approximately four hours to

fully charge the battery. Other chargers may take longer.

Upgrading Firmware

DJI Assistant 2

Use DJI Assistant 2 to upgrade the Goggles.

1. Power on the Goggles and connect them to a computer with a Micro USB cable.

2. Launch DJI Assistant 2 and login with a registered DJI account.

3. Select "Goggles" and click "Firmware Upgrade" on the left-hand side.

4. Select the firmware version required.

5. DJI Assistant 2 will download and upgrade the firmware automatically.

6. Restart the Goggles after the firmware upgrade is complete.

Use DJI Assistant 2 to upgrade the aircraft and remote controller of the Mavic Pro and the Goggles

simultaneously (only supports connection topology for Standard Mode).

1. Ensure all devices are powered on and that the aircraft is linked with the remote controller.

2. Connect the remote controller to a computer with a Micro USB cable.

3. Launch DJI Assistant 2 and login with a registered DJI account.

4. Select "RC for Mavic Pro" and click "Firmware Upgrade" on the left-hand side.

5. Select the required firmware version.

6. DJI Assistant 2 will download and upgrade the firmware automatically.

7. Restart all devices when the firmware upgrade is complete.

DJI GO 4 App

Use the DJI GO 4 app to upgrade the aircraft and remote controller of the Mavic Pro and the

Goggles simultaneously (only supports connection topology for Standard Mode).

1. Ensure all devices are powered on and that the aircraft is linked with the remote controller.

2. Connect the remote controller with the DJI GO 4 app. A prompt will appear if a new firmware

upgrade is available. To start upgrading, connect a mobile device to the Internet and follow the

on-screen instructions.

3. Restart all devices when the firmware upgrade is complete.

Cleaning and Maintenance

Be sure to unplug the charger from the power outlet before cleaning and ensure that there are no

cables connected.

Cleaning the Goggles

Wipe and clean the surface of the Goggles with a soft clean cloth.

To clean the facial pad, first drag it from the left or right side to the inside, then detach the other