EdilKamin LOGO Manual de instalación, uso y mantenimiento - Página 7
Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Estufa de leña EdilKamin LOGO. EdilKamin LOGO 20 páginas.
Imprimir página
g.
g.
B
K
g.
N
X
K
B
S
N1
N2
g.
g. 9
N-X
V
B
COVERING INSTALLATION
g.
A
g.
X
N
g.
X
N
P
N1
g. 8
g.
T
+ardware included
no. upper brackets for ceramic [ing (K - g. -)
no. upper brackets for ceramic [ing (1 - g. )
no. Flat ceramic adMustment bracket (; - g. )
no. $ngle ceramic adMustment bracket (1 - g. )
no. Self-tapping screws , [ 9,
no. Knurled pins
no. Screws 0 [ 8
nr. Rubber spacers (1 - g. )
Fig.
7his gure represents the stove after it has been unpacked.
Fig.
7he stove is delivered with the metal part of the lower side
coverings ($) alread\ assembled.
ASSEMBLY OF CERAMIC SIDE COMPONENTS
Fig.
- $ppl\ the upper ceramic [ing brackets (K) on the top rear
part of the ceramic panels, with the engraved arrow facing the
front of the stove, securing them in the dedicated holes using
the pins supplied.
1ote. the side ceramic components must be mounted with the
lower groove facing the front of the stove (S - g. ).
,n addition, inside the L7 or R7 version is indicated.
Fig.
- Fi[ the at ceramic adMustment bracket (;) to the angle ce-
ramic adMustment bracket (1) using the . [ 9. self-tapping
screws supplied.
Fig. -
- $ppl\ the previousl\ assembled brackets (1 -;) on the upper
ceramic [ing bracket (K), securing them in the dedicated
holes using the pins supplied.
Fig.
- $ppl\ the lower ceramic [ing brackets (1) on the bottom
rear part of the ceramic panels, with the engraved arrow facing
the front of the stove, securing them in the dedicated holes
using the pins supplied.
Fig. 8 - 9
- Flank the lower part of the ceramic side, tting the lower ce-
ramic [ing bracket (1) on the pins (3) present on the frame
of the stove.
- &omplete the operation b\ Moining the upper part of the cera-
mic side and screwing the brackets (;-1) into the holes on the
top (use the 0[8 screws supplied -9).
$77(17,21 '85,1* 23(1,1* 0$.( 685( 7+(
'225 '2(6 127 &20( ,172 &217$&7 :,7+ 7+(
6,'( &(5$0,& (/(0(176
VERIFY THE CORRECT COUPLING OF THE SIDE
CERAMIC COMPONENTS WITH THE CAST IRON
SIDES, MAKING ANY NECESSARY ADJUSTMENTS
USING THE SCREWS (V) AND THE BRACKETS (N-X).
IF NECESSARY USE THE PADS (N2) SUPPLIED.
CERAMIC TOP ASSEMBLY
Fig.
3lace the ceramic top (7) centring it in the housings on the cast
iron top.
- 25
-